Sagola 3600 XPT Spray Gun

Description Sagola 3600 XPT Gravity-Feed Spray Gun The Sagola 3600 XPT is a pro-grade gravity spray gun built for clean, repeatable finishes with less waste. Tuned atomization, precise fan/product control, and rugged wetted materials make it a reliable choice for automotive refinish, wood finishing, plastics, and general industrial coatings. Why finishers choose the 3600 XPT Factory-matched aircaps—XPT CLEAR, XPT BASE, and XPT HVLP—so you can dial in atomization for clear, base, or compliant work. Real-world pressure guidance: recommended 1.4–2.2 bar (20.3–31.9 psi); HVLP 1.8 bar (26 psi) for transfer efficiency and control. Air consumption you can plan for—~285 L/min on CLEAR/BASE and ~360 L/min on HVLP. Built to last: wetted parts in anodized aluminum, stainless steel, PTFE, POM, and nylon Application sweet spot Run the gun in its recommended window—start near 2.0 bar for CLEAR/BASE, or 1.8 bar for HVLP—then trim fan and product for pattern and flow. Keep the gun perpendicular and within the advised distance: EPA 15–20 cm; HVLP 12–15 cm for best transfer and finish. Technical highlights Aircaps XPT CLEAR / XPT BASE / XPT HVLP Air consumption ~285 L/min (CLEAR/BASE); ~360 L/min (HVLP) Recommended pressure 1.4–2.2 bar (20.3–31.9 psi); HVLP 1.8 bar (26 psi) Max inlet pressure 4 bar (58 psi) Application distance EPA 15–20 cm; HVLP 12–15 cm Tip/needle options Ø 1.2 / 1.3 / 1.4 (kits) Air inlet BSP 1/4″ M Materials (wetted) Anodized aluminum, stainless steel, PTFE, POM, nylon Operating temp 0–60 °C (32–140 °F) ATEX Non-electrical II 2G T4 x (use earthing/static-free hoses) Setup tips (fast, consistent results) Open fan and product, spray a test pass, then close down to target flow/pattern—don’t chase finish with excess pressure. Use clean, dry air with coalescing filtration; size compressor volume to match your chosen aircap Maintain perpendicular gun travel and consistent distance to maximize transfer. Safety & compliance Do not exceed 4 bar static pressure. For ATEX areas, ground the equipment and use static-free air hoses. Follow manufacturer safety guidance for coating materials and thinners. Interchangeable PartsConsistent high quality finishesLow Maintenance Sagola 3600 Manual Sagola 3600 Exploded View